PDA

View Full Version : need some parts for a savage 94b, but not sure which ones.


swinger_s87
January 6, 2005, 03:12 AM
I recently found a stevens 94b 20Ga in my dad's closet. nobody is sure of the history of the gun, it just seems to have appeared there. the stock screw is broken (easy fix), but what i need help on is that there is no firing pin or any assembly for it. I need a little help to know which parts i need to order. I found the firing pin screw, but i need to know if there is any thing to go around the firing pin to support it further. I attached an image to this post showing the area where the firing pin should be. Any help would be greatly appreciated.

cntryboy1289
January 6, 2005, 04:14 AM
The Numrich catalog shows just the screw holding the pin in place. Put the pin with the flat on top and put the screw in place from the top. The screw is a$1.20 and the pin is $6.40.

Sorry but no idea on manufacturing date for the gun. Check with the folks at Savage, they are generally very helpful when it comes to history on their guns.

cntryboy1289
January 6, 2005, 04:17 AM
The Numrich catalog shows just the screw holding the pin in place. You would think there would be a spring with it, but it doesn't show one. Put the pin with the flat on top and put the screw in place from the top. The screw is a$1.20 and the pin is $6.40.

Sorry but no idea on manufacturing date for the gun. Check with the folks at Savage, they are generally very helpful when it comes to history on their guns.

swinger_s87
January 14, 2005, 10:19 PM
Thank you, I just got the parts in, the firing pin doesnt need a spring, it just floats back and forth. Now I just need to fix the stupid stock.

Thanks again.