PDA

View Full Version : Beretta 96 question


2400
October 24, 2004, 05:41 PM
I took a few guns out for some exercise today. I have a question, all my auto's pile the brass in a reasonable small area except my Beretta 96. It throws the brass in front of me, behind me, way behind me, way way behand me, off to the side, way off to the side, way way off to the side very seldom are 2 cases in the same spot. Is there a way to fix or adjust this? :confused:

Alaskanmonte
October 26, 2004, 10:12 PM
I wouldn't worry about were your brass is landing. Just shoot your gun and be happy :)

CzarShel
October 27, 2004, 04:12 AM
Buy one of those plastic, or bag style http://image.sportsmansguide.com/dimage/77663_ts.JPG?cell=200,200&cvt=jpeg combersome brass catchers, if your really that worried about it :)

2400
October 27, 2004, 11:23 AM
Since I've put over 14,000 rounds through it I'm not too worried about it. I was just wondering if all 96's did this since none of my 92's do.

Alfa One
October 27, 2004, 02:08 PM
It just keeps it exciting for anyone standing beside you, trying to avoid them.

Brian D.
October 27, 2004, 03:49 PM
I'm sure it's possible for a good 'smith (someone who specializes in Berettas, perhaps?) to "tune" the ejector and extractor somewhat, reducing this tendency to scatter the empties. But if that's the only "problem" one of my pistols had, the wallet would stay put, 'til something more critical came up.

2400
October 27, 2004, 11:26 PM
I know that you can tune the extractor on a 1911, I just didn't know if you could do that on a Beretta. It's not so much a problem just something I've been wondering about for years. I took my wife out shooting today for her birthday and it tossed 250 rounds all over the place. We had a great time shooting about 800 rounds, and had a picnic lunch to boot. :D :D

Wallew
October 30, 2004, 07:28 PM
2400,

You said:

Since I've put over 14,000 rounds through it I'm not too worried about it.

Has this pistol ALWAYS DONE THIS? If not, perhaps JUST replacing the extractor and ejector will solve most of this problem.

ON the other hand, if this pistol has ALWAYS done this, then a 'tune up' would probably be in order. And don't be surprised if the FIRST THING the smith does is replace both the ejector & extractor.

Good luck!

2400
November 2, 2004, 02:46 AM
ON the other hand, if this pistol has ALWAYS done this, then a 'tune up' would probably be in order. And don't be surprised if the FIRST THING the smith does is replace both the ejector & extractor

It's done this since I got it. I have replaced the ejector, extractor and springs with no change at all. So I guess it will just toss brass until it wears out and gets retired. :D