PDA

View Full Version : Crossman 760 pumpmaster in pieces


houndpup
April 22, 2002, 04:01 PM
I have a friend who has a Crossman 760 Pumpmaster air rifle in pieces. He really wants to put it back together for his son. I was hoping that someone out there might have a copy of the assembly instructions for this gun. Please help if you can. Thanks.

UK2TX
April 25, 2002, 10:08 PM
Hello houndpup,

Follow this URL http://groups.google.com/groups?hl=en&lr=lang_en&safe=active&threadm=3A458F00.9E4CB9A9%40sympatico.ca&rnum=1&prev=/groups%3Fq%3DCrossman%2520rifle%2520diagram%26num%3D100%26hl%3Den%26lr%3Dlang_en%26safe%3Dactive%26sa%3DN%26tab%3Dwg titled "Help with Crossman CO2 rifle" and you will find this:

Contact Airguns Canada http://www.airgunscanada.com/
These folks are located in Edmonton,Alberta and should be able to
provide all you need.They may be able to send a photocopy of the assy
diagram to aid in the repairs.
The fellow running the store(Roger) is the son of the man who bought
Crosmans stock of obsolete spare parts some years back.Pretty much all
the seals are available,many parts as well.For the most part,if the part
is not available here,it probably can't be had.
I got the seals set for an old air pistol from them and the bill
totalled under $20(YMMV)
Tell them Trevor Jones sent you(they probably won't hang up on you
:-))

C.R.Sam
April 25, 2002, 11:04 PM
That's a keeper. Thanks UK2TX.

Sam

rapidfirex
February 17, 2007, 12:15 PM
This is 5 years late but maybe someone will need it....

http://www.fotolode.com/images/Rapidfirex/crosmanpumpmaster760assembly.jpg

calvertfire
September 1, 2007, 11:41 AM
The picture is perfect! THANK YOU

The only advise I have is the hook does not go around the safety but rests on top of it. The slight spring pressure holds it in place.

rapidfirex
November 9, 2007, 09:14 PM
Your welcome

Liberal Guy
December 13, 2008, 10:38 PM
Thanks for posting the photo. My kid's air rifle was all apart after a jammed pellet which I only diagnosed after dissassembly. I don't suppose anyone knows if it is normal for these little air guns to leak a little air after pumping which can be heared at the muzzle?

SDC
December 14, 2008, 08:54 AM
No, it's not normal, and it means that there's a leak somewhere in the gas system which is going to require a stripping, cleaning, and proper lubrication.