Help field stripping Star model 30 pk

1929officialpolice · June 3, 2013, 09:28 AM

One of my employees picked up this pistol and can not find instructions on how to field strip it. Wondering if anybody here could help. Thank you.

car · June 3, 2013, 11:05 AM

Here is a manual showing field stripping. It is in Spanish, but the pictures will show how. One important thing to remember is to line up the two marks on the left side of the frame and slide before attempting to push out the slide stop.

http://www.star-firearms.com/firearm...ual-fn-esp.pdf

Here is an English manual for the 31P, it is similar and gives a little more info.

http://www.star-firearms.com/firearm...m31-manual.pdf

1929officialpolice · June 3, 2013, 12:00 PM

Thank you for the help

candr44 · June 4, 2013, 04:07 PM

The 31 manual will work for field stripping the model 30 but the internal parts for the safety and extractor are different. The 30 extractor and safety detent pin share the same spring. The extractor is held in on the 30 by spring tension only and will fall out after the safety is removed and spring tension is released. Also, the 30 safety right side lever is released by pushing in the pin in the center and sliding it off.

June 3, 2013, 09:28 AM	#1
1929officialpolice Member Join Date: July 11, 2012 Posts: 59	Help field stripping Star model 30 pk One of my employees picked up this pistol and can not find instructions on how to field strip it. Wondering if anybody here could help. Thank you.

June 3, 2013, 11:05 AM	#2
car Member Join Date: October 20, 2012 Posts: 60	Here is a manual showing field stripping. It is in Spanish, but the pictures will show how. One important thing to remember is to line up the two marks on the left side of the frame and slide before attempting to push out the slide stop. http://www.star-firearms.com/firearm...ual-fn-esp.pdf Here is an English manual for the 31P, it is similar and gives a little more info. http://www.star-firearms.com/firearm...m31-manual.pdf

June 3, 2013, 12:00 PM	#3
1929officialpolice Member Join Date: July 11, 2012 Posts: 59	Thank you for the help

June 4, 2013, 04:07 PM	#4
candr44 Senior Member Join Date: February 11, 2006 Posts: 481	The 31 manual will work for field stripping the model 30 but the internal parts for the safety and extractor are different. The 30 extractor and safety detent pin share the same spring. The extractor is held in on the 30 by spring tension only and will fall out after the safety is removed and spring tension is released. Also, the 30 safety right side lever is released by pushing in the pin in the center and sliding it off.